| 2024 |
LIN, SHU-YUAN, A study of Optical Communication Technologies For 5G wireless access network-Single Channel, 2024
|
| 2024 |
CHEN, HAO-YUAN, Fabrication of Single-Channel OADM devices by MEMS Technologies, 2024
|
| 2024 |
HUANG, CI-HONG, Fabicaltion of optical filters by using polymers and Integrated-optics technologies, 2024
|
| 2023 |
A study of 5G communication system over optical fiber based on external modulation techniques, 2023
|
| 2023 |
Fabrication of Asymmetric Bragg Coupler devices with three-segment structure by micro-optic, 2023
|
| 2023 |
Analysis and research on multi-channel integrated optical add/drop multiplexing devices, 2023
|
| 2023 |
Analysis of Integrated Optical Multi-Channel optical filter with asymmetric multi-segment waveguide by using polymer materials, 2023
|
| 2023 |
Development of polymer optical filters on optical glass substrates of integrated circuits, 2023
|
| 2023 |
Symbolic Interval Generalized Improved Fuzzy Partitions Fuzzy C-Means Clustering Algorithm, 2023
|
| 2023 |
Study of High-Sensitivity D-shaped Optical Filters Using Soft Film Bragg Grating Techniques, 2023
|
| 2022 |
Projection Mechanical Energy Transformation Demonstrator, 2022
|
| 2021 |
Study on the Modulation of Two-Dimensional Electron Gas to Improve the Performance of Enhancement-mode High Electron Mobility Transistors, 2021
|
| 2021 |
Improving the Electrical Properties of GaN-based High Electron Mobility Transistors using AlN Heterostructure, 2021
|
| 2021 |
Effects of Evaporated Indium-Doped Molybdenum Oxide and Sputtered Copper Indium Oxide on Photovoltaic Characteristics of Screen-Printed Monocrystalline Silicon Solar Cells, 2021
|
| 2021 |
Effects of Evaporated Cuprous Oxide and Sputtered CuAlO2 on Photovoltaic Characteristics of Screen-Printed Monocrystalline Silicon Solar Cells, 2021
|
| 2021 |
Photovoltaic Characteristics of Monocrystalline Silicon Solar Cells with Nickel Oxide Electron-Blocking Layers Deposited by Evaporator and Sputter, 2021
|
| 2021 |
Effects of Evaporated Zinc-Doped Molybdenum Oxide and Sputtered Strontium Copper Oxide on Photovoltaic Characteristics of Screen-Printed Monocrystalline Silicon Solar Cells, 2021
|
| 2021 |
Spectrum Analysis for Asymmetric Bragg Coupler, 2021
|
| 2021 |
Coupling Coefficient Analysis for Asymmetric Bragg Coupler, 2021
|
| 2019 |
Fabrication Of Optical Add/Drop Multiplexing Filters With High Coupling Efficiency, 2019
|
| 2019 |
Design of Dense Wavelength Division Multiplexing Dual-Channel Filters, 2019
|
| 2018 |
A Study of Optical Filters Based on Asymmetric Bragg Couplers with Liquid Crystal Tuned Spectra, 2018
|
| 2018 |
Design of Optical Filters Based on D-shaped Optical Filters Covered With Soft Bragg Grating Molds, 2018
|
|
Fu-Hsing Lu, Fabrication of Integrated Optics Polymer Dual channel filters
|
|
Zong-Ting Chuang, An Investigation of Photonic-Crystal based Bragg Grating Devices
|
|
Shr-Wei Chen, A Fabrication of Asymmetric Bragg Coupler without Self-reflection
|
|
Hui-Chun Lin, Analysis of the Optical Characteristics of Photonic-Crystal-Slab-Waveguide Cavities with Liquid Crystal Defects
|
|
Yi-Fen Pei, Design and Analysis of Ring Resonators Based on Two-Dimensional Photonic Crystal Slab Waveguides
|
|
Chun-Hui Chen, Design and Implementation of a Vehicle LED Front Fog Lamp with High Sharp Bright Gradient Based on a Free Form Surface Lens
|
|
Wei-Pin Su, Coating process improvement in a sputtering system and its applications in copper-coating on transparent conductive film.
|
|
Wei-Sung Weng, Design and Research of the Bending Waveguidesand Photonic Crystal Elements Based on Integrated Optics
|
|
Yu-Tao Hsiao, Study of Dual-Chanel filters based on High Asymmetric Bragg Couplers
|
|
Chia-Rung HU, Asymmetric Waveguide Filled with Different Polymer Materials Production OADM Elements
|
|
Bai-Hao Lin, The Liquid Crystal Polymer With The Asymmetric Waveguide Bragg Grating Element
|
|
Chiao-Lin Wen, The Fiber Bragg Grating Sensing Analysis by Using The Grating Mold Combined with D-Shaped Optical Fiber
|
|
Wei-Chih Cheng, Analysis of the Optical Characteristic of Photonic Crystal based on Silicon Substrate with PDMS Pillars
|
|
Yao-Ching Tsai, Development of fabrication process for integrated-circuit package using cooper as the bonding material
|
|
Chin-An Tso, A Fabrication of surface-relief fiber grating using micro-molding process
|
|
Yu-Cheng Yeh, Fabrication of D-shaped Optical Fiber Bragg Filters/Sensors using Soft-Lithographic Molding Technologies
|
|
Hong Minh Nguyen, An Investigation of Integrated Optics OADM Coupler/Filter based on Polymeric Waveguide
|
|
Ching-Tsai Hsieh, Investigation and Application of a Thermal Module for High Bright LED Day-time Running Light
|
|
Chien-Chang Chang, Design and Manufacture of An LED Vehicle Beam Light with A High Contract Cut-off Line
|
|
Chiung-Hung Chen, Design and Analysis of the Microstructures of the Heat Sink for LED Daylights
|
|
Chiu-Chaing Chen, An Analysis of Leaking Improvement of the Car Lights by Using the Watertight Test Technology
|
|
Tsung-Hsin Kuo, Analysis and Investigation of the Improvement of Moisture in Headlamp by Adjusting the Gap between Lens and Bezel
|
|
Ching-Yu Huang, Design and Analysis of Steering Systems for After-market Adaptive Front Lighting Systems(AFS's)
|
|
Chen-Hsiung Huang, The Influence of Injection Conditions on the Optical Characteristics of Plastic Lenses Fabricated by Using Inject-molding Processing
|
|
Chao-Chun Chen, Design of a Vehicle LED Rear Fog Lamp with Uniform-Distributed Light Field
|
|
Chin-Fu Chen, Analysis and Investigation of Moistures in Head Light Systems
|
|
Chiun-Jie Lin, Design of The Controllers for Adaptive Front Lighting Systems (AFS) by Using Fuzzy Control Theory
|
|
Ting-Yao Huang, Design and Analysis of the Optical Characteristics of Light Guides for Parking Lamps
|
|
Jing-Yau Tang, Fabrication of Asymmetric Bragg Coupled Devices with Polymer Waveguides by Using Micro-Molding Process
|
|
Yan-Wun Ding, Fabrication of an Asymmetric Bragg Coupler Filter with non-identical Core Materials
|
|
You-Rang Chen, Fabrication of an Optical Add/Drop Multiplexer with Liquid Crystal in an Asymmetric Bragg Coupler Waveguide
|
|
Yi-Zhong Zhong, The Fabrication of Optical Filter Component by D-shaped Single Mode Fiber
|
|
Pin-Hao Lin, A Study of Asymmetric Bragg Coupling Components Fabricated by MEMS Technology
|
|
Wei Chih Hsieh, Fabrication of Polymer channel waveguide fiber devices
|
|
Tzu Ming Wang, Fabrication of Inverted-Ridge Polymeric Optical Filter
|
|
GAO, SHAO-CHENG, Effects of Thermal Treated and Stacked Molybdenum Oxide Hole-Selective Transfer Layers on Photovoltaic Characteristics of Screen-Printed Monocrystalline Silicon Solar Cells
|
|
Chien-Hung Chen, Upgrade the Production Allowance for Multi-Plate P-Lens Mega Pixels Optical Design
|
|
Wen-Kal Cheng, Improvement of LED Heat Radiating and Brightness by DLC Film
|
|
Thanh-Tung Phan, Effects of Laser Firing on PhotovoltaicCharacteristics of Screen-Printed MonocrystallineSilicon Solar Cells
|
|
Chin-Yi Kuo, Fabrication of Planer Polymer Waveguide Bragg Reflector Device
|
|
wu- tung Tsai, A study of D-Shape Optical Fiber Fabrication
|
|
Yuan Pei Cheng, Fabrication of Optical filter on D-type fibers
|
|
Meng-Chu Tsai, A study of Asymmetric Polymer Waveguide Couplers with Bragg Reflectors
|
|
Kuei-Wen Cheng, The Fabrication of Surface Relief Fiber Bragg Grating by Using MEMS Technology
|
|
Zhi-Qi Li, Study of Smart Sensors Based on D-shaped Optical Fibers
|
|
Manh-Tan Nguyen, Effects of Screen-Printed Aluminum-Alloyed Front Emitter on Characteristics of Screen-Printed N-Type Mono-Crystalline Silicon Solar Cells
|
|
Pin-Yuan Lin, Fabrication of OADM Devices Based on Soft Lithography
|
|
Yen-Chen Lin, Fabrication and Research of Soft Mold Embossing Technology for Optical Add/Drop Multiplexer
|
|
Tsuan-Shih Lee, Study on the intensity transmission type three-dimensional (3D) microscope
|
|
Szu-Wei Lu, Fabrication of Polymer Waveguide Bragg Grating Filter by Using Micro-Molding process
|
|
Jun-Neng, Wang, A Fabrication of D-shaped Fiber Bragg Grating
|
|
Jain Ting Guo, An Optimal Design of the Microstructures of the Refection and Warning Light
|
|
Chi-Hsing Lin, A study of asymmetric Bragg coupled device with polymer waveguides
|
|
Tien-Yi Lin, Optical Characteristic Analysis of Planar Waveguide Devices based on Photonic Crystal Structures
|
|
Gua-Nlun Chung, Fabrication of Dual-Wavelength Filter by Using D-Shaped Single Mode Fibers
|
|
Chien-Zhou Huang, An Analysis and Design of the Mold of the Car-Light Reflection Mirrors
|
|
Po-Jen Chen, Analysis and Investigation of the Venting Structure in a Vehicle Lamp to Improve the Uniformity of the Heat Distribution
|
|
Kuo-Tsun Chen, An Analysis of the Influence of the Lamp-Shell Thickness on the Optical Characteristics of the Headlamps
|
|
Kuan-Yu Chen, An Analysis of the Influences of the Materials And Thickness on the Structures of the Car Lights
|
|
Wei-Ming Chen, Design of Light Splitting Structures in LED Light Guide Systems and Analyzing the Influences on the Uniformity of Light Distribution
|
|
Chi-Ming Shiu, An Optimal Design of the LED Heat Pipes
|
|
Chi-Shuen Lian, Design and Analysis of Projective Head Lamps with Sided Light Sources
|
|
HSIEH, HSIN-CHE, Fiber Vibration Sensor Location Technology Based on TDOA
|
|
LIU, ZHONG-YONG, Effects of Screen-Printed Silver Paste and Various Carrier- Selective Contact Layers on Photovoltaic Characteristics of Monocrystalline Silicon Solar Cells
|
|
Meng-Tzung Liu, Optimal Design of a High Conductivity Solder Ball and Underfill Technology for Wafer Level Chip Scale Package
|
|
Yu-Syun Chen, Preparation and Research of High Aspect Ratio Nano-Grating Device
|
|
Nguyen Thi Loan, Fabrication of the Asymmetric Bragg Grating Coupler Filter
|
|
Chun-Ping Lin, Fabrication of Sensor Filter Besed on D-shaped Single Mode Fiber
|
Department of Electro-Optical Engineering, NFU